| パートいいえ | メーカー | アプリケーション |
|---|
| MAX188BEPP | MAXIMIC | Low-power, 8-channel, serial 12-bit ADC. |
| MAX8868EUK33-T | MAXIMIC | Low-noise, low-dropout, 150mA linear regulator with auto discharge function. Preset output voltage 3.30V |
| MAX6316LUK31DZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.080V, min reset timeout 1.12sec, typ watchdog timeout 25.6sec |
| MAX6320PUK38DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.800V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| ICL7136CPI | MAXIMIC | Low power, 3-1/2 digit A/D converter |
| MAX639CSA | MAXIMIC | 5V or adjustable, high-efficiency, current-limiting PFM control scheme, step-down DC-DC converter. |
| MAX4075AHESA | MAXIMIC | Micropower, Rail-to-Rail, fixed-gain, dual, GainAmp op amp. Inverting gain 2.5V/V, noninverting gain 3.5V/V, -3dB BW 116kHz. |
| MAX814KCPA | MAXIMIC | +-1% accuracy, low-power, microprocessor supervisory circuit. Reset trip threshold (min) 4.75V (max) 4.85V, push-pull active-low reset output, push-pull active-high reset output, manual reset, power-fail monitor, low-line detector. |
| MAX537AEPE | MAXIMIC | Calibrated, quad, 12-bit voltage-output DAC with serial interface. +-5V supply operation. INL (LSB) +-1/2 |
| MAX355MJE | MAXIMIC | Fault-protected analog multiplexer |
| MAX6378UR46-T | MAXIMIC | Ultra-low-power voltage detector, 4.6V |
| MAX800MESE | MAXIMIC | Microprocessor supervisory circuit. Reset threshold(typ) 4.4V. Guaranteed power-fail accuracy to +-2% |
| MAX6309UK48D2-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 4.680(min),4.920(max) Nominal timeout period 20ms. |
| MAX6321HPUK41BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.100V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| MAX6318LHUK43CX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 4.300V min, reset timeout 140ms,typ watchdog timeout 102ms |
| MAX531BCSD | MAXIMIC | +5V, low-power, voltage-output, serial 12-bit DAC. Error (LSB) +-1. Internal 2.048V reference. Flexible output ranges 0V to Vdd, Vss to Vdd, 0V to 2.6V. |
| ICL7126CQH | MAXIMIC | Low power, 3 1/2 digit A/D converter |
| MAX704RESA | MAXIMIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 2.625V. Active-low reset. Manual reset input. Backup-battery switch. Power-fail threshold accuracy +-4%. Power-fail comparator. Reset window +-75mV |
| MAX206CWG | MAXIMIC | +5V RS-232 transceiver with 0.1 microF external capacitors |
| MAX4522CPE | MAXIMIC | Quad, low-voltage, SPST analog switch. |
| MX390KD | MAXIMIC | Quad, 12-bit, microprocessor-compatible DAC. INL(LSBs) +-1/2. |
| MAX6305UK00D4-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output, 2 additional undervoltage reset inputs). Nominal timeout period 200ms. |
| MAX174BCWI | MAXIMIC | Industry standard complete 12-bit A/D converter. 8 microsec. max conversion time. Linearity (LSBs) 1/2. TEMPCO (ppm/C) 27. |
| MAX6316LUK39BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.900V, min reset timeout 20ms, typ watchdog timeout 6.3ms |
| MAX6502CMP035-T | MAXIMIC | Low-cost, +2.7V to +5.5V micropower temperature switch. Output stage push-pull. Standard temperature threshold(C) +35. |
| MAX1687ESA | MAXIMIC | Step-up DC-DC converter with precise, adaptive current limit for GSM. |
| MAX833CWE | MAXIMIC | Fixed output 3V, 1A, step-down, PWM, switch-mode DC-DC regulator. |
| OP90EZ | MAXIMIC | Precision low voltage micropower operational amplifier. |
| MAX6310UK26D3-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 2.564(min),2.696(max). Nominal timeout period 140ms. |
| MAX324CSA | MAXIMIC | Precision, single-supply, SPST analog switch. |
