| パートいいえ | メーカー | アプリケーション |
|---|
| MAX6359LSUT-T | MAXIMIC | Dual-voltage microprocessor supervisory circuit with manual reset. Reset threshold 4.63V (Vcc5) and 2.93V (Vcc3). Active-low push-pull reset 5V. Watchdog timer. Standard version. |
| MAX3480AEPI | MAXIMIC | Complete, isolated, 3.3V RS-485/RS-422 data interface. Data rate 2500 kbps. |
| MAX6309UK31D1-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 3.003(min),3.157(max) Nominal timeout period 1ms. |
| MAX539BEPA | MAXIMIC | +5V, low-power, voltage-output, serial 12-bit DAC. Error (LSB) +-1. 140microA supply current. Flexible output ranges 0V to Vdd. |
| MAX506AEPP | MAXIMIC | Quad 8-bit DAC with Rail-to-Rail voltage outputs. Separate input latches for each of its four DACs. TUE +-1 LSB. |
| MAX354CWE | MAXIMIC | Fault-protected analog multiplexer |
| MAX6316MUK25BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 2.500V, min reset timeout 20ms, typ watchdog timeout 6.3ms |
| MAX6318LHUK31DZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.080V min, reset timeout 1.12sec, typ watchdog timeout 25.6sec |
| MAX6316LUK43DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.300V, min reset timeout 1120ms, typ watchdog timeout 102ms |
| MAX4205EUA | MAXIMIC | Ultra-high-speed 780MHz -3dB bandwidth, 280MHz 0.1dB gain flatness, low-noise, low-power, open-loop buffer. |
| MAX6316LUK44DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.390V, min reset timeout 1120ms, typ watchdog timeout 102ms |
| MAX6318MHUK42CZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.200V, reset timeout(min) 140ms, watchdog timeout(typ) 25.6sec |
| MX7624CSE | MAXIMIC | CMOS 8-bit buffered multiplying DAC. TTL/CMOS compatible at +12V to +15V. Error +-1/2 LSB |
| MAX6318LHUK37CW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.700V min, reset timeout 140ms,typ watchdog timeout 6.3ms |
| MAX6316MUK41DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.100V, min reset timeout 1120ms, typ watchdog timeout 6.3ms |
| MAX6315US36D4-T | MAXIMIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 3.60V. Reset timeout period(min) 1120ms. |
| MAX4613CEE | MAXIMIC | Quad, SPST, CMOS analog switch has two NC and two NO switches. |
| MAX8868EUK36-T | MAXIMIC | Low-noise, low-dropout, 150mA linear regulator with auto discharge function. Preset output voltage 3.60V |
| MAX455EJP | MAXIMIC | CMOS 50MHz video amplifier with an on-board multiplexer offering 8-channels |
| MAX6321HPUK27CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.700V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec |
| MAX1682EUK-T | MAXIMIC | Switched-capacitor voltage doubler. |
| MAX121CWE | MAXIMIC | 308ksps ADC with DSP interface and 78dB SINAD |
| MAX379MJE | MAXIMIC | High-voltage, fault-protected analog multiplexer. |
| MAX763AC/D | MAXIMIC | Step-down, current-mode PWM DC-DC controller. Input voltage range 3.3V to 11V |
| MAX6312UK26D2-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual-reset input). Factory-trimmed reset thresholds 2.564(min) 2.696(max). Nominal timeout period 20ms. |
| MAX643ACPA | MAXIMIC | +15V fixed output, 10W CMOS step-up switching regulator. 5% output accuracy |
| MAX972ESA | MAXIMIC | Ultra-low-power, open-drain, dual comparator. Internal precision reference none. Internal hysteresis no. |
| MAX6315US40D3-T | MAXIMIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 4.00V. Reset timeout period(min) 140ms. |
| MAX3232EEUP | MAXIMIC | +-15kV ESD-protected, down to 10nA, 3.0V to5.5V, up to 1Mbps, true RS-232 transceiver. |
| MAX6320PUK36DZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.600V, reset timeout(min) 1.12sec, watchdog timeout(typ) 25.6sec |
