| パートいいえ | メーカー | アプリケーション |
|---|
| MAX6318MHUK47AZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.700V, reset timeout(min) 1ms, watchdog timeout(typ) 25.6sec |
| MAX970ESD | MAXIMIC | Quad, micropower, ultra-low-voltage, Rail-to-Rail I/O comparator. |
| MAX5250ACAP | MAXIMIC | Low-power, quad, 10-bit, voltage-output DAC with serial interface. INL(LSB) +-1/2. |
| MAX4622EPE | MAXIMIC | Low on-resistance 3om(typ), 5om(max), dual, SPDT, analog switch has two NO and two NC poles. |
| MAX6318LHUK32BZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.200V min, reset timeout 20ms, typ watchdog timeout 25.6sec |
| DG409C/D | MAXIMIC | Improved, dual 4-channel, CMOS analog multiplexer |
| MAX6318LHUK30AY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.000V min, reset timeout 1ms, typ watchdog timeout 1.6sec |
| MAX6314US25D1-T | MAXIMIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 2.50V. Reset timeout period(min) 1ms. |
| MAX4604EPE | MAXIMIC | Low on-resistance (5om max), quad, SPST, CMOS analog switches (four NC switches). |
| MAX642ACPA | MAXIMIC | +12V fixed output, 10W CMOS step-up switching regulator. 5% output accuracy |
| MAX6318MHUK35DY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.500V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| MAX4512CSE | MAXIMIC | Quad, Rail-to-Rail, fault-protected, SPST analog switch. |
| DG387CK | MAXIMIC | General purpose CMOS dual analog switch. |
| MAX6309UK27D1-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 2.633(min),2.768(max) Nominal timeout period 1ms. |
| DG418CJ | MAXIMIC | Improved, SPST, NO analog switch |
| MAX389C/D | MAXIMIC | High-voltage, fault-protected analog multiplexer. 4-channel differential (2 of 8). |
| MXD1000SA175 | MAXIMIC | 5-tap silicon delay line |
| MAX632AMJA | MAXIMIC | CMOS fixed +12V output voltage, adjustable output with 2 resistors step-up switching regulator. 5% output accuracy. |
| MAX4252EUA | MAXIMIC | Dual, single-supply operation +2.4V to 5.5V, low-noise, low-distortion, Rail-to-Rail op amp. Gain bandwidth 3MHz, min stable gain 1V/V. |
| MX565AKD | MAXIMIC | High speed 12-bit monolithic D/A converter. High stability buried zener 10V reference. Error +-1/4LSB |
| MAX547BCMH | MAXIMIC | Octal, 13-bit voltage-output DAC with parallel interface. INL(LSBs) +-4. |
| MAX6317HUK38BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.800V, min reset timeout 20ms, typ watchdog timeout 6.3ms |
| MAX866EUA | MAXIMIC | 3.3V or adjustable-output, single-cell DC-DC converter |
| MAX3316ECUP | MAXIMIC | +-15kV ESD-protected, 2.5V, 1microA, 460kbps, RS-232 compatible transceiver. |
| MAX521BEWG | MAXIMIC | Octal, 2-wire serial 8-bit DAC with Rail-to-Rail, unbuffered outputs. TUE(LSB) 2. |
| ICL7652BIJA | MAXIMIC | Chopper-stabilized operational amplifier |
| MAX5035AUPA | MAXIMIC | 1A, 76V, high-efficiency MAXPower step-down DC-DC converter, output 3.3V |
| MAX3260C/D | MAXIMIC | 1GHz transimpedance preamplifier with 25dB dynamic range. |
| MAX7232BFIPL | MAXIMIC | Triplexed LCD decoder/driver (10 digits/7 segments; serial input format; 2 annunciators per digit) |
| IH5142C/D | MAXIMIC | Low power fast CMOS analog switch. Single pole, doube throw (SPDT). |
