| パートいいえ | メーカー | アプリケーション |
|---|
| MAX268AMRG | MAXIMIC | Pin programmable univesal and bandpass filter. Accuracy 1%. |
| MAX7404CSA | MAXIMIC | 8-th-order, lowpass, elliptic, switched-capacitor filter. Filter response elliptic (r=1.5), operating voltage +3V |
| ICM7556IPD | MAXIMIC | Dual general purpose RC timer |
| MAX4224ESA | MAXIMIC | Dual, 600MHz -3dB bandwidth, min gain +2, low-power, current-feetback amplifier with shutdown. |
| MAX6317HUK49DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.900V, min reset timeout 1120ms, typ watchdog timeout 6.3ms |
| MAX5131AEEE | MAXIMIC | +3V, 13-bit, serial voltage-output DAC. Built-in 10ppm/C(max) precision bandgap reference +1.25V. INL (LSB) +-1. Full-scale output range +2.04775V. |
| MAX6316MUK45AX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.500V, min reset timeout 1ms, typ watchdog timeout 102ms |
| MAX5253BC/D | MAXIMIC | +3V, quad, 12-bit, voltage-output DAC with serial interface. INL(LSB) +-1. |
| MAX6318LHUK34BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.400V min, reset timeout 20ms, typ watchdog timeout 6.3ms |
| MAX6307UK33D3-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds3.218(min),3.383(max).Nominal timeout period 140ms. |
| MAX4546CPE | MAXIMIC | Dual,low-voltage T-switch designed for switching RF and video signals from DC to 300MHz in 50om and 75om systems. |
| MAX151BC/D | MAXIMIC | 300kHz 10-bit A/D converter with reference and T/H. TUE 1.5 LSB. |
| MAX6322HPUK44B-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.390V, reset timeout(min) 20ms |
| MAX6313UK29D2-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 2.857(min) 3.000(max).Nominal timeout period 20ms. |
| MX7502SE | MAXIMIC | Low-power, monolithic, CMOS analog multiplexer. |
| MAX4543ESA | MAXIMIC | Low-voltage, single-supply dual SPST analog switch. |
| MX7541SQ | MAXIMIC | CMOS 12 bit multiplying D/A converter. Error 1 LSB. |
| MAX814LCSA | MAXIMIC | +-1% accuracy, low-power, microprocessor supervisory circuit. Reset trip threshold (min) 4.65V (max) 4.75V, push-pull active-low reset output, push-pull active-high reset output, manual reset, power-fail monitor, low-line detector. |
| MAX690AC/D | MAXIMIC | Microprocessor supervisory circuit. 4.65V precision supply-voltage monitor |
| MAX6316MUK35DZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.500V, min reset timeout 1120ms, typ watchdog timeout 25.6sec |
| MX7530JCWE | MAXIMIC | CMOS 10 bit multiplying D/A converter. Error 0.2% |
| MAX6312UK41D3-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual-reset input). Factory-trimmed reset thresholds 3.998(min) 4.203(max). Nominal timeout period 140ms. |
| MAX6376UR25-T | MAXIMIC | Ultra-low-power voltage detector, 2.5V |
| MAX6318MHUK37CX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.700V, reset timeout(min) 140ms, watchdog timeout(typ) 102ms |
| MAX6313UK26D1-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 2.564(min) 2.696(max).Nominal timeout period 1ms. |
| MAX4490AXK-T | MAXIMIC | Single, low-cost, high-slew-rate, Rail-to-Rail I/O op amp. |
| MAX400CSA | MAXIMIC | Ultra low offset voltage operational amplifier. |
| MAX909C/D | MAXIMIC | Quad, high-speed, ultra low-power, single +-5V supply operation TTL comparator. Internal latch. |
| MAX6319MHUK50D-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 5.000V, reset timeout(min) 1120ms |
| MAX6317HUK27CZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 2.700V, min reset timeout 140ms, typ watchdog timeout 25.6sec |
