| パートいいえ | メーカー | アプリケーション |
|---|
| MAX694EPA | MAXIMIC | Microprocessor supervisory circuit. |
| MAX1270BEAI | MAXIMIC | Multirange, +5V, 8-channel, serial 12-bit ADC. INL(LSB) +1,-1 |
| MAX6313UK39D3-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 3.803(min) 3.998(max).Nominal timeout period 140ms. |
| MX7576JN | MAXIMIC | CMOS, microprocessor-compatible, fast conversion time 10 microsec, 8-bit ADC. INL +-1 LSB. |
| MAX637AMJA | MAXIMIC | Preset -15V output or adjuistable output with 2 resistors, CMOS switching regulator. Output accuracy 5%. |
| MX7535KN | MAXIMIC | Microprocessor-compatible, 14-bit DAC. INL +-1 LSB. |
| MAX339ESE | MAXIMIC | Dual 4-channel, low-leakage, CMOS analog multiplexer. |
| MAX9687CPE | MAXIMIC | Dual, ultra-fast ECL-output comparator |
| MAX4521CEE | MAXIMIC | Quad, low-voltage, SPST analog switch. |
| MAX6319LHUK50D-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-low,push/pull and active-high, push/pull).Factory-trimmed reset threshold(typ) 5.000V, reset timeout(min) 1120ms |
| MAX4540EWP | MAXIMIC | Low-voltage, dual 4-to-1 calibration multiolexer. |
| MX7837KN | MAXIMIC | Complete, dual, 12-bit multiplying DAC. 8-bit + 4-bit interface. Error (LSB) +-1/2 |
| MAX329MJE | MAXIMIC | Ultra-low lealage monolithic CMOS analog multiplexer. |
| MAX6318MHUK31DY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.080V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| MAX801MCSA | MAXIMIC | Supervisory circuit with +-1.5% reset accuracy. Reset threshold(typ) 4.425V. Watchdog. |
| MAX313MJE | MAXIMIC | 10Om, quad, SPST, CMOS analog switch |
| MAX6320PUK49BZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.900V, reset timeout(min) 20ms, watchdog timeout(typ) 25.6sec |
| MAX3235EEWP | MAXIMIC | +-15kV ESD-protected, 1microA, 250kbps, 5.0V, dual RS-232 with internal capacitor. |
| MAX1161ACPI | MAXIMIC | 10-bit, 40 Msps, TTL-output ADC |
| MAX6320PUK35DZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.500V, reset timeout(min) 1.12sec, watchdog timeout(typ) 25.6sec |
| MAX550AEPA | MAXIMIC | +2.5V to +5.5V, low-power, single, 8-bit voltage-output DAC with an external reference input and an asynchronous load input. |
| MAX1271AEAI | MAXIMIC | Multirange, +5V, 8-channel, serial 12-bit ADC. INL(LSB) +1/2,-1/2 |
| MAX6322HPUK50B-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 5.000V, reset timeout(min) 20ms |
| DG300CK | MAXIMIC | Dual, TTL compatible CMOS analog switche |
| MAX638AESA | MAXIMIC | Fixed +5V output or adjuistable output with 2 resistors, CMOS step-down switching regulator. |
| MAX6310UK27D3-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 2.633(min),2.768(max). Nominal timeout period 140ms. |
| MAX3084EPA | MAXIMIC | Fail-safe, high-speed (10Mbps), slew-rate-limited RS-485/RS-422 transceiver |
| MAX1246AMJE | MAXIMIC | +2.7V, low-power, 4-channel, serial 12-bit ADC. INL (LSB) +1/2,-1/2 |
| MAX651EPA | MAXIMIC | 3.3V or adjustable, high-efficiency, current-limited control scheme, step-down DC-DC controller. |
| MAX6318MHUK26BX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 2.630V, reset timeout(min) 20ms, watchdog timeout(typ) 102ms |
