| パートいいえ | メーカー | アプリケーション |
|---|
| MAX766ESA | MAXIMIC | -15V or adjustable output from -1V to -16V, high-efficiency, low IQ DC-DC inverter |
| MAX4542ESA | MAXIMIC | Low-voltage, single-supply dual SPST analog switch. |
| MAX6319MHUK46C-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.630V, reset timeout(min) 140ms |
| MAX713C/D | MAXIMIC | NiCd/NiMH battery fast-charge controller (negative voltage-slope detection scheme). |
| MAX6318LHUK34CX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.400V min, reset timeout 140ms, typ watchdog timeout 102ms |
| MAX797CPE | MAXIMIC | Step-down controller with synchronous rectifier for CPU power. 3.3V/5V or adjustable main output. Logic-controlled low-noise mode. |
| MXD1013C/D045 | MAXIMIC | 3-in-1 silicon delay line. Output delay 45ns. |
| MAX5253AEPP | MAXIMIC | +3V, quad, 12-bit, voltage-output DAC with serial interface. INL(LSB) +-1/2. |
| MAX619MJA | MAXIMIC | Regulated 5V charge-pump DC-DC converter. |
| MAX4501EUK-T | MAXIMIC | Low-voltage, SPST, CMOS analog switch. |
| MAX707ESA | MAXIMIC | Low-cost, microprocessor supervisory circuit. Active-high reset output. Precision supply-voltage monitor 4.65V. |
| MM74C947N | MAXIMIC | 4 digit up/down counter/decoder/driver. |
| MAX207ECAG | MAXIMIC | +-15kV ESD-protected, +5V RS-232 transceiver |
| ICL7665ACTV | MAXIMIC | Microprocessor voltage monitor with dual overvoltage and undervoltage detection |
| MAX6318MHUK40DY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.000V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| MAX627CPA | MAXIMIC | Dual non-inverting power MOSFET driver. |
| MAX6346XR39-T | MAXIMIC | Microprocessor supervisory circuit (reset output active-low, push-pull). Reset threshold (typ) 3.900V. Order increment 10k |
| MAX4603EWE | MAXIMIC | Low on-resistance (2.5om max), quad, SPST, CMOS analog switches (two NO and two NC switches). |
| MAX308MJE | MAXIMIC | Precision, 8-channel, high-performance, CMOS analog multiplexer. |
| MXL1007AMJ8 | MAXIMIC | Low-noise, precision operational amplifier. |
| MAX4532EWP | MAXIMIC | Low-voltage, CMOS analog ICs configured as three single-pole/double-throw switch. |
| MAX6307UK30D4-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds2.925(min),3.075(max).Nominal timeout period 1120ms. |
| MAX6318LHUK29DZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 2.930V min, reset timeout 1.12sec, typ watchdog timeout 25.6sec |
| MAX4556CSE | MAXIMIC | Force-sense switches (three indepedent SPDT switches, of which one is a force switch and two sense switches). |
| MAX450CPD | MAXIMIC | CMOS video amplifier |
| MAX6317HUK39CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.900V, min reset timeout 140ms, typ watchdog timeout 1.6sec |
| IH5143M/D | MAXIMIC | Low power fast CMOS analog switch. Dual, single pole, doube throw (Dual SPDT). |
| MAX4218ESD | MAXIMIC | Triple, miniature, 200MHz -3dB bandwidth, single 3.3V/5.0V operation, Rail-to-Rail op amp with enable. |
| MAX188CCCP | MAXIMIC | Low-power, 8-channel, serial 12-bit ADC. |
| MX7672KP10 | MAXIMIC | High-speed 12-bit A/D converter with external reference input. Fast conversion time 10 microsec. Linearity +-1 LSB. |
