| パートいいえ | メーカー | アプリケーション |
|---|
| DG419DJ | MAXIMIC | Improved, SPDT (1-NO, 1-NC) analog switch |
| MAX405CSA | MAXIMIC | Precision video buffer amplifier. |
| MAX942EUA | MAXIMIC | Dual, high-speed, low-power, 3V or 5V single-supply, Rail-to-Rail comparator |
| MAX6307UK47D3-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds4.583(min),4.818(max).Nominal timeout period 140ms. |
| MAX6501UKP065-T | MAXIMIC | Low-cost, +2.7V to +5.5V micropower temperature switch. Output stage open-drain. Standard temperature threshold(C) +65. |
| MAX1112EPP | MAXIMIC | 5 V, low-power, multi-channel, serial 8-bit ADC. 8-channel single-ended or 4-channel differential inputs |
| ICM7260IJE | MAXIMIC | Programmable timer/counter |
| MAX4580CWE | MAXIMIC | 1.25om, dual SPST, CMOS analog switch. Two NC (normally closed) switches. |
| MX7575JN | MAXIMIC | CMOS, microprocessor-compatible, fast conversion time 5 microsec, 8-bit ADC. INL +-1 LSB. |
| MAX3083ESD | MAXIMIC | Fail-safe, high-speed (10Mbps), slew-rate-limited RS-485/RS-422 transceiver |
| MAX3232ECWE | MAXIMIC | +-15kV ESD-protected, down to 10nA, 3.0V to5.5V, up to 1Mbps, true RS-232 transceiver. |
| MAX6316MUK45DY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.500V, min reset timeout 1120ms, typ watchdog timeout 1.6sec |
| MAX805SEPA | MAXIMIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 2.925V. Active-high reset. Watchdog input. Backup-battery switch. Power-fail threshold accuracy +-4%. Power-fail comparator. Reset window +-75mV |
| MAX223EAI | MAXIMIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX6321HPUK28AZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.800V, reset timeout(min) 1ms, watchdog timeout(typ) 25.6sec |
| MAX6307UK31D3-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds3.003(min),3.157(max).Nominal timeout period 140ms. |
| MAX818LESA | MAXIMIC | +5V microprocessor supervisory circuit. Reset threshold 4.65V, active-low reset, backup-battery switchover, watchdog input, battery freshness seal, chip-enable gating. |
| MAX110AEPE | MAXIMIC | Low-cost, 2-channel, 14-bit serial ADC. |
| MAX503CAG | MAXIMIC | 5V, low-power, parallel-input, voltage-output 10-bit DAC. |
| MAX3832UCB | MAXIMIC | +3.3V, 2.5Gbps, SDH/SONET, 4-channel interconnect mux/demux ICs with clock generator. |
| MAX6333UR17D1-T | MAXIMIC | Ultra-low-voltage, low power microprocessor reset circuit. Reset threshold(typ) 1.7V, reset timeout(min) 1ms. |
| MAX6318MHUK49CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.900V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec |
| MAX139C/D | MAXIMIC | 3 1/2 digit A/D converter with bandgap reference and charge-pump voltage converter |
| MAX167BEWG | MAXIMIC | CMOS 12-bit A/D converter with track-and-hold. Error +-1 LSB. |
| MAX191AMRG | MAXIMIC | Low-power, 12-bit sampling ADC with internal reference and power-down. Error(LSB) +-1/2. |
| MAX1270ACNG | MAXIMIC | Multirange, +5V, 8-channel, serial 12-bit ADC. INL(LSB) +1/2,-1/2 |
| ICM7218DIJI | MAXIMIC | 8 digit LED display driver |
| MAX4588CAI | MAXIMIC | Low-voltage, high-isolation, dual 4-channel RF and video multiplexer. |
| MAX134CPL | MAXIMIC | 3 3/4 digit DMM circuit. 3 separate address lines and 4-bit bidirectional data bus. |
| ICL7663C/D | MAXIMIC | Programmable positive voltage regulator |
