| パートいいえ | メーカー | アプリケーション |
|---|
| MAX738AEWE | MAXIMIC | 5V, step-down, current-mode PWM DC-DC converter accept inputs between 65V and 16V and deliver 750mA. |
| MAX6316LUK35DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.500V, min reset timeout 1.12sec, typ watchdog timeout 102ms |
| MAX6713TEXS-T | MAXIMIC | Microprocessor reset circuit with manual reset input. Reset threshold 3.08V. Output type active-low open-drain reset. |
| MAX780DCAP | MAXIMIC | Dual-slot PCMCIA analog power controller. Dual Vpp switches & level shifter for Vcc switching. |
| MAX6306UK39D4-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 3.803(min),3.998(max) Nominal timeout period 1120ms. |
| MXT429C/D | MAXIMIC | High-speed, 6A single MOSFET driver. 4.5V t0 18V supply range. |
| MAX4605ESE | MAXIMIC | Low on-resistance (5om max), quad, SPST, CMOS analog switches (four NO switches). |
| MAX4274AGESA | MAXIMIC | Dual, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 2, 1+ (Rf/Dg) noninverting gain 3, -3dB BW 970kHz. |
| MAX820MCPE | MAXIMIC | Microprocessor and non-volatile metory supervisory circuit. Reset threshold 4.37V. Reset and low-line threshold accuracy +-2% |
| MAX820MMJE | MAXIMIC | Microprocessor and non-volatile metory supervisory circuit. Reset threshold 4.37V. Reset and low-line threshold accuracy +-2% |
| MAX6321HPUK42AZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.200V, reset timeout(min) 1ms, watchdog timeout(typ) 25.6sec |
| MAX534BEEE | MAXIMIC | 5V, low-power, 8-bit quad DAC with Rail-to-Rail output buffer. INL (LSB) +-2 |
| MAX4265ESA | MAXIMIC | Single, ultra-low-distortion, single-supply, 300MHz op apm with enable. Min gain 1V/V, single-supply operation +4.5V to +8.0V |
| MAX6321HPUK40DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.000V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| MAX4018EEE | MAXIMIC | Low-cost, high-speed, single-supply op amp with Rail-to-Rail outputs. High speed 150MHz - 3dB bandwidth. Transistor count 299 . |
| MAX6316LUK45BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.500V, min reset timeout 20ms, typ watchdog timeout 6.3ms |
| MAX6321HPUK27DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.700V, reset timeout(min) 1.12sec, watchdog timeout(typ) 6.3ms |
| MAX776CSA | MAXIMIC | -15V or adjustable, high-efficiency, low IQ inverting DC-DC controller |
| MAX4052AMJE | MAXIMIC | Low-voltage, CMOS analog multiplexer |
| MAX206ECWG | MAXIMIC | +-15kV ESD-protected, +5V RS-232 transceiver |
| MAX924MJE | MAXIMIC | Quad micropower, low-voltage comparator. Intarnal 1.182V+-1% voltage reference. |
| ICL7621AMTV | MAXIMIC | Dual operational amplifier, 2mV |
| MAX6501CMP115-T | MAXIMIC | Low-cost, +2.7V to +5.5V micropower temperature switch. Output stage open-drain. Standard temperature threshold(C) +115. |
| MAX541BCPA | MAXIMIC | +5V,serial-input, voltage-output, 16-bit DAC. INL (LSB) +-2 |
| MAX814KEPA | MAXIMIC | +-1% accuracy, low-power, microprocessor supervisory circuit. Reset trip threshold (min) 4.75V (max) 4.85V, push-pull active-low reset output, push-pull active-high reset output, manual reset, power-fail monitor, low-line detector. |
| MAX4583CEE | MAXIMIC | Low-voltage, CMOS analog switch (three SPDT switches). |
| MAX508BCPP | MAXIMIC | Voltage-output, 12-bit DAC with internal reference. 8+4 data-bus widths. Error +-3/4. |
| MAX6321HPUK46AZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.630V, reset timeout(min) 1ms, watchdog timeout(typ) 25.6sec |
| ADC0820BCJ | MAXIMIC | CMOS high speed 8-bit A/D converter with track/hold function. INL(LSB) +-1/2. |
| MAX820RESE | MAXIMIC | Microprocessor and non-volatile metory supervisory circuit. Reset threshold 2.61V. Reset and low-line threshold accuracy +-2% |
