| パートいいえ | メーカー | アプリケーション |
|---|
| ICL7614BCPA | MAXIMIC | Single operational amplifier,5mV |
| MAX5302CUA | MAXIMIC | Low-power, 12-bit voltage-output DAC with serial interface. |
| MAX6316MUK41BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.100V, min reset timeout 20ms, typ watchdog timeout 6.3ms |
| MAX6319MHUK38C-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.800V, reset timeout(min) 140ms |
| MAX4531CPP | MAXIMIC | Low-voltage, CMOS analog ICs configured as two 4-channel multiplexer. |
| MX7574KCWN | MAXIMIC | Microprocessor compatible 8-bit A/D converter. Fast conversion time 15microsec. Error +-1/2 LSB. |
| MAX8868C/D33 | MAXIMIC | Low-noise, low-dropout, 150mA linear regulator with auto-discharge function. Preset output voltage 3.30V |
| MAX6320PUK25DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 2.500V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| MAX4175BBEUK-T | MAXIMIC | Single, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 12.5, 1+ (Rf/Dg) noninverting gain 13.5, -3dB BW 460kHz. |
| MAX314CPE | MAXIMIC | 10Om, quad, SPST, CMOS analog switch |
| MAX708TCPA | MAXIMIC | Low-cost, microprocessor supervisory circuit. Precison supply-voltage monitor 3.08V. Active-low and active-high reset output signal. |
| SI7661DY | MAXIMIC | CMOS voltage converter |
| MAX6317HUK48BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.800V, min reset timeout 20ms, typ watchdog timeout 1.6sec |
| MAX6318LHUK37BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.700V min, reset timeout 20ms,typ watchdog timeout 1.6sec |
| MAX6347XR39-T | MAXIMIC | Microprocessor supervisory circuit (reset output active-high, push-pull). Reset threshold (typ) 3.900V. Order increment 10k |
| MAX6320PUK47BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.700V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| MAX6321HPUK35DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.500V, reset timeout(min) 1.12sec, watchdog timeout(typ) 6.3ms |
| MAX188ACWP | MAXIMIC | Low-power, 8-channel, serial 12-bit ADC. |
| MAX6312UK43D2-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual-reset input). Factory-trimmed reset thresholds 4.193(min) 4.408(max). Nominal timeout period 20ms. |
| MAX4543EPA | MAXIMIC | Low-voltage, single-supply dual SPST analog switch. |
| MAX542AEPD | MAXIMIC | +5V,serial-input, voltage-output, 16-bit DAC. INL (LSB) +-1 |
| MAX533AEPE | MAXIMIC | 2.7V, low-power, 8-bit quad DAC with Rail-to-Rail output buffer. INL (LSB) +-1 |
| MAX4527CUA | MAXIMIC | Phase-reversal analog switch. |
| MAX3318ECUP | MAXIMIC | +-15kV ESD-protected, 2.5V, 1microA, 460kbps, RS-232 compatible transceiver. |
| MAX857CUA | MAXIMIC | Adjustable-output, step-up DC-DC converter. Adjustable version 0.8V to 6.0V input voltage, output voltage 2.7V to 6.0V range. |
| MAX358CJE | MAXIMIC | Fault-protected analog 8 channel single-ended (1 of 8) multiplexer. |
| MAX638ACSA | MAXIMIC | Fixed +5V output or adjuistable output with 2 resistors, CMOS step-down switching regulator. |
| IH5045CPE | MAXIMIC | General-purpose CMOS analog switch. Dual, double pole, single throw (Dual DPST) |
| MAX6504UKN045-T | MAXIMIC | Low-cost, +2.7V to +5.5V micropower temperature switch. Output stage push-pull. Standard temperature threshold(C) -45. |
| MAX6319LHUK25A-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-low,push/pull and active-high, push/pull).Factory-trimmed reset threshold(typ) 2.500V, reset timeout(min) 1ms |
