パス:okデータシート > 半導体データシート > MAXIMICデータシート > MAXIMIC-169
810MEXR-T10 MAX8215C/D DG406C/D MAX6320PUK25CW-T MAX953EPA MAX381CPE MAX6317HUK38BX-T MAX4560ESE MAX747EPD MAX6321HPUK31CW-T MAX4667EPE MX7533LN MAX6316MUK33CY-T MX7502JQ MAX6575HZUT MAX6316MUK35BW-T MAX7413EUA MAX651CPA MAX252ACHL ICM7250C MAX1113CPE MAX709TEPA MXD1005SE100 MX75
パートいいえ | メーカー | アプリケーション |
---|---|---|
MAX6319MHUK48A-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.800V, reset timeout(min) 1ms |
MAX810MEXR-T10 | MAXIMIC | Microprocessor reset circuit. Reset threshold 4.38V. Push-pull active-high reset. 10k increments. |
MAX8215C/D | MAXIMIC | +-5V, +-12V dedicated microprocessor voltage monitor. |
DG406C/D | MAXIMIC | Improved, 16-channel CMOS analog multiplexer |
MAX6320PUK25CW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 2.500V, reset timeout(min) 140ms, watchdog timeout(typ) 6.3ms |
MAX953EPA | MAXIMIC | Ultra low-power, single-supply Op Amp + comparator. Op Amp gain stability 1V/V. Supply current 5microA. |
MAX381CPE | MAXIMIC | Precision, low-voltage analog switch. |
MAX6317HUK38BX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.800V, min reset timeout 20ms, typ watchdog timeout 102ms |
MAX4560ESE | MAXIMIC | +-15kV ESD-protected, low-voltage, CMOS analog switch (triple SPDT). |
MAX747EPD | MAXIMIC | High-efficiency, PWM, step-down P-channel DC-DC controller |
MAX6321HPUK31CW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.080V, reset timeout(min) 140ms, watchdog timeout(typ) 6.3ms |
MAX4667EPE | MAXIMIC | 2.5om, quad, SPST, CMOS analog switch (two NC switches). |
MX7533LN | MAXIMIC | CMOS low-cost 10 bit multiplying D/A converter. Error 0.05% |
MAX6316MUK33CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.300V, min reset timeout 140ms, typ watchdog timeout 1.6sec |
MX7502JQ | MAXIMIC | Low-power, monolithic, CMOS analog multiplexer. |
MAX6575HZUT | MAXIMIC | Temperature sensor with multidrop single-wire digital interface. Timeout multiplier (microsec/K) 160,320,480,640. |
MAX6316MUK35BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.500V, min reset timeout 20ms, typ watchdog timeout 6.3ms |
MAX7413EUA | MAXIMIC | 5th-order, lowpass, switched-capacitor filter. Filter response bessel, operating voltage +3V |
MAX651CPA | MAXIMIC | 3.3V or adjustable, high-efficiency, current-limited control scheme, step-down DC-DC controller. |
MAX252ACHL | MAXIMIC | Complete, +5V-powered, isolated, dual RS-232 transceiver module. |
ICM7250C | MAXIMIC | Programmable timer/counter |
MAX1113CPE | MAXIMIC | 5 V, low-power, multi-channel, serial 8-bit ADC. 4-channel single-ended or 2-channel differential inputs |
MAX709TEPA | MAXIMIC | Power-supply monitor with reset. Reset threshold voltage 3.08V |
MXD1005SE100 | MAXIMIC | 5-tap silicon delay line |
MX7521UD | MAXIMIC | CMOS 12 bit multiplying D/A converter. Error 0.05% |
MAX349CAP | MAXIMIC | Serially controlled, low-voltage, 8-channel multiplexer |
MAX3111EEWI | MAXIMIC | SPI/MICROWIRE-compatible UART and +-15kV ECD-protected RS-232 transceiver with internal capacitor. Single-supply operation +3.3V. Vcc (V) 3.3 |
MAX6316MUK26AW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 2.630V, min reset timeout 1ms, typ watchdog timeout 6.3ms |
MAX6191CESA | MAXIMIC | Precision, micropower, low-dropout voltage reference. Output voltage 2.048V, initial accuracy +-10, temperature coefficient <25ppm. |
MAX912EPE | MAXIMIC | Single, ultra-fast(10ns), low-power, precision TTL comparator. |