| パートいいえ | メーカー | アプリケーション |
|---|
| MAX6321HPUK37BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.700V, reset timeout(min) 20ms, watchdog timeout(typ) 6.3ms |
| MAX6316MUK42CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.200V, min reset timeout 140ms, typ watchdog timeout 1.6sec |
| MAX756C/D | MAXIMIC | 3.3V to 5V adjustable-output, step-up DC-DC converter. |
| MAX111ACPE | MAXIMIC | Low-cost, 2-channel, 14-bit serial ADC. |
| MX7581SQ | MAXIMIC | CMOS 8-bit 8-channel data acquisition system. Error 1 7/8 LSB. |
| MXD1000C/D100 | MAXIMIC | 5-tap silicon delay line |
| MAX782CBX | MAXIMIC | Triple-output power-supply controller for notebook computer. Vout 3.3V |
| MAX6321HPUK32DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.200V, reset timeout(min) 1.12sec, watchdog timeout(typ) 6.3ms |
| MX7501JQ | MAXIMIC | Low-power, monolithic, CMOS analog multiplexer. |
| MAX5355CPA | MAXIMIC | 10-bit voltage-output DAC. +3.3V single supply operation. |
| MAX6307UK28D3-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds2.730(min),2.870(max).Nominal timeout period 140ms. |
| MAX8864REUK-T | MAXIMIC | Low-dropout, 120mA linear regulator with auto-discharge function. Preset output voltage 2.80V |
| MAX6335US22D3-T | MAXIMIC | Ultra-low-voltage, low power microprocessor circuit with manual reset (reset output active-high, push/pull . Reset threshold(typ) 2.2V, reset timeout(min) 100ms. Standard version |
| MAX4511EPE | MAXIMIC | Quad, Rail-to-Rail, fault-protected, SPST analog switch. |
| MAX902MJD | MAXIMIC | High-speed, low-power voltage comparator |
| MX7582KP | MAXIMIC | Calibrated 4-channel 12-bit ADC |
| DG421DJ | MAXIMIC | Improved low-pover, CMOS analog switches with latches |
| ICL7632BCSE | MAXIMIC | Triple operational amplifier, 5mV |
| MAX4265EUA | MAXIMIC | Single, ultra-low-distortion, single-supply, 300MHz op apm with enable. Min gain 1V/V, single-supply operation +4.5V to +8.0V |
| ICL7650CSD | MAXIMIC | Chopper-stabilized amplifier |
| MXD1013SE025 | MAXIMIC | 3-in-1 silicon delay line. Output delay 25ns. |
| MAX506ACWP | MAXIMIC | Quad 8-bit DAC with Rail-to-Rail voltage outputs. Separate input latches for each of its four DACs. TUE +-1 LSB. |
| MAX452MJA | MAXIMIC | CMOS unity-gain stable, 50MHz video amplifier. |
| MAX6316MUK36BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.600V, min reset timeout 20ms, typ watchdog timeout 6.3ms |
| MX7542GBQ | MAXIMIC | CMOS microprocessor-compatible 12 bit DAC. Error +1/2 LSB. |
| MAX6316LUK27CZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 2.700V, min reset timeout 140ms, typ watchdog timeout 25.6sec |
| DG301AA | MAXIMIC | Quad, TTL compatible CMOS analog switch. |
| MX7528AQ | MAXIMIC | CMOS dual 8 bit buffered multiplying DAC. +5V to 15V single supply operation. Error +-1 LSB. |
| MAX4552CEE | MAXIMIC | +-15kV ESD-protected, quad, low-voltage, SPST analog switches (four NO switches). |
| MAX6320PUK28CZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 2.800V, reset timeout(min) 140ms, watchdog timeout(typ) 25.6sec |
