| パートいいえ | メーカー | アプリケーション |
|---|
| MAX507AEWG | MaximIC | Voltage-output, 12-bit DAC with internal reference. 12 data-bus widths. Error +-1/2. |
| MAX5351BEPA | MaximIC | Low-power, 13-bit voltage-output DAC with serial interface. INL (LSB) +-2. +3.3V single-supply operation. |
| MAX6335US23D3-T | MaximIC | Ultra-low-voltage, low power microprocessor circuit with manual reset (reset output active-high, push/pull . Reset threshold(typ) 2.3V, reset timeout(min) 100ms. Standard version |
| MAX692MJA | MaximIC | Microprocessor supervisory circuit. |
| MAX6316MUK48CY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.800V, min reset timeout 140ms, typ watchdog timeout 1.6sec |
| MX7528KEWP | MaximIC | CMOS dual 8 bit buffered multiplying DAC. +5V to 15V single supply operation. Error +-1/2 LSB. |
| MAX481ESA | MaximIC | Low-power, slew-rate-limited RS-485/RS-422 transceiver. Half-duplex. Data rate 2.5Mbps. Slew-rate limited - no. Low-power shutdown - yes. Receiver/driver enable - yes. Quiescent current - 300 microA. Number of transmitter on bus - 32. |
| MAX172CC/D | MaximIC | Complete 10 microsec. CMOS 12-bit ADC. Error +- 1 LSB. |
| MAX412EPA | MaximIC | Dual, 28MHz, low-noise, low-voltage, precision op amp. |
| ICM7260IJE | MaximIC | Programmable timer/counter |
| MAX514BCNG | MaximIC | CMOS quad, 12-bit, serial-input multiplying DAC. DNL(LSBs) +-1. |
| MAX909EPA | MaximIC | Quad, high-speed, ultra low-power, single +-5V supply operation TTL comparator. Internal latch. |
| ICL7137CQH | MaximIC | Low power, 3-1/2 digit A/D converter |
| MAX6504CMN005-T | MaximIC | Low-cost, +2.7V to +5.5V micropower temperature switch. Output stage push-pull. Standard temperature threshold(C) -5. |
| MAX6319MHUK31C-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.080V, reset timeout(min) 140ms |
| MAX6317HUK29CZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 2.930V, min reset timeout 140ms, typ watchdog timeout 25.6sec |
| REF02CSA | MaximIC | +5V precisioon voltage reference. Max TEMPCO 65ppm/degC. Initial error +-50mV |
| DG528CJ | MaximIC | 8-channel latchable multiplexer |
| MAX203EWP | MaximIC | +5V RS-232 transceiver with 0.1 microF external capacitors |
| MAX6321HPUK42BY-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.200V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| MAX6315US37D2-T | MaximIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 3.70V. Reset timeout period(min) 20ms. |
| MAX494EPD | MaximIC | Quad, micropower, single-supply operation (+2.7V to +6V), Rail-to-Rail op amp. |
| MAX6361PUT26-T | MaximIC | Low-power microprocessor supervisory circuit with manual reset input. Reset threshold(typ) 2.63V. Active-low open-drain reset. |
| MX7672LN10 | MaximIC | High-speed 12-bit A/D converter with external reference input. Fast conversion time 10 microsec. Linearity +-1/2 LSB. |
| MAX6319LHUK45C-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-low,push/pull and active-high, push/pull).Factory-trimmed reset threshold(typ) 4.500V, reset timeout(min) 140ms |
| MAX6318LHUK49AX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input, reset output active-low, push/pull; active-high,push/pull).Factory-trimmed reset threshold (typ) 4.900V, min reset timeout 1ms, typ watchdog timeout 102ms |
| MAX3085CPA | MaximIC | Fail-safe, high-speed (10Mbps), slew-rate-limited RS-485/RS-422 transceiver |
| MAX6316LUK44DW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.390V, min reset timeout 1120ms, typ watchdog timeout 6.3ms |
| MAX238C/D | MaximIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX6313UK36D1-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 3.510(min) 3.690(max).Nominal timeout period 1ms. |
