| パートいいえ | メーカー | アプリケーション |
|---|
| MAX4516CSA | MAXIMIC | +-1V to +-6V dual-supply opration, low-on-resistance, SPST, CMOS analog switch. Normally open (NO). |
| MAX6316MUK36DY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.600V, min reset timeout 1120ms, typ watchdog timeout 1.6sec |
| MAX6320PUK40DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.000V, reset timeout(min) 1.12sec, watchdog timeout(typ) 6.3ms |
| MAX6363LUT31-T | MAXIMIC | Low-power microprocessor supervisory circuit with battery-on output. Reset threshold(typ) 3.06V. Active-low push-pull reset. |
| MXL1016CS8 | MAXIMIC | Ultra-fast precision TTL comparator. 10ns typ high-speed. |
| MAX2430IEE | MAXIMIC | Low-voltage, silicon RF power amplifier/predriver. |
| MAX4244ESD | MAXIMIC | Quad, ultra-low-voltage operation guaranteed down to +1.8V, typical operation to +1.5V, 10microA supply current, Beyond-the-Rail op amp. |
| MAX983ESA | MAXIMIC | Ultra-low-power, open-drain, dual comparator. Internal precision reference 2%. Internal hysteresis yes. |
| MAX6322HPUK45C-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.500V, reset timeout(min) 140ms |
| MAX6318MHUK39BZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.900V, reset timeout(min) 20ms, watchdog timeout(typ) 25.6sec |
| MAX1114BIBH | MAXIMIC | 8-bit,150 Msps flash ADC |
| MAX6317HUK43DZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.300V, min reset timeout 1.12sec, typ watchdog timeout 25.6sec |
| MAX6359TYUT-T | MAXIMIC | Dual-voltage microprocessor supervisory circuit with manual reset. Reset threshold 3.08V (Vcc5) and 2.19V (Vcc3). Active-low push-pull reset 5V. Watchdog timer. |
| MAX6316MUK43BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.300V, min reset timeout 20ms, typ watchdog timeout 1.6sec |
| ICL7652IJD | MAXIMIC | Chopper-stabilized operational amplifier |
| MAX4543CSA | MAXIMIC | Low-voltage, single-supply dual SPST analog switch. |
| MAX1090ACEI | MAXIMIC | 400ksps, +5V, 8-channel single-ended/4-channel pseudo-differential, 10-bit ADCs with +2.5V reference and parallel interface. INL (LSB) 0.5 |
| MAX977EEE | MAXIMIC | Dual, +3V and +5V dual-speed comparator with auto-standby. . |
| MAX4249ESD | MAXIMIC | Dual, single-supply operation +2.4V to 5.5V, low-noise, low-distortion, Rail-to-Rail op amp. Gain bandwidth 22MHz, min stable gain 10V/V, with shutdown mode. |
| MAX6318MHUK32CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.200V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec |
| MAX6310UK34D1-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 3.315(min),3.485(max). Nominal timeout period 1ms. |
| MAX6316MUK41DY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.100V, min reset timeout 1120ms, typ watchdog timeout 1.6sec |
| MX7531LD | MAXIMIC | CMOS 12 bit multiplying D/A converter. Error 0.05% |
| MAX801LEPA | MAXIMIC | Supervisory circuit with +-1.5% reset accuracy. Reset threshold(typ) 4.675V. Watchdog. |
| MAX3488CSA | MAXIMIC | 3.3V-powered, 10Mbps and slew-rate-limited true RS-485/RS-422 transceiver. Guaranteed data rate 0,25Mbps. Supply voltage 3.0V to 3.6V |
| MAX6316LUK50BZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 5.000V, min reser timeout 20ms, typ watchdog timeout 25.6sec. |
| MAX6358LRUT-T | MAXIMIC | Dual-voltage microprocessor supervisory circuit with manual reset. Reset threshold 4.63V (Vcc5) and 2.63V (Vcc3). Active-low open-drain reset. Watchdog timer. |
| MAX4530CWP | MAXIMIC | Low-voltage, CMOS analog ICs configured as an 8-channel multiplexer. |
| MAX521BEAG | MAXIMIC | Octal, 2-wire serial 8-bit DAC with Rail-to-Rail, unbuffered outputs. TUE(LSB) 2. |
| MAX301CPE | MAXIMIC | Precision, dual, high-speed analog switch. |
