| パートいいえ | メーカー | アプリケーション |
|---|
| MAX6320PUK34DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.400V, reset timeout(min) 1.12sec, watchdog timeout(typ) 6.3ms |
| DG309C/D | MAXIMIC | Quad, SPST, NC analog switch |
| MAX317C/D | MAXIMIC | Precision, CMOS analog switch |
| MAX6321HPUK32CZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.200V, reset timeout(min) 140ms, watchdog timeout(typ) 25.6sec |
| MAX6316MUK41CZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.100V, min reset timeout 140ms, typ watchdog timeout 25.6sec |
| MX7545GUQ | MAXIMIC | CMOS 12-bit buffered multiplying DAC. Error +-1/2 LSB. +-1 LSB gain accuracy. |
| MAX820SEJE | MAXIMIC | Microprocessor and non-volatile metory supervisory circuit. Reset threshold 2.91V. Reset and low-line threshold accuracy +-2% |
| MAX6318MHUK39DY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.900V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| MAX407EPA | MAXIMIC | 1.2microA max, dual, single-supply op amp. |
| MX7547SQ | MAXIMIC | CMOS parallel loading dual 12 bit multiplying D/A converter. Gain error +-6 LSB. |
| MAX6318LHUK48AZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input, reset output active-low, push/pull; active-high,push/pull).Factory-trimmed reset threshold (typ) 4.800V, min reset timeout 1ms, typ watchdog timeout 25.6sec |
| MAX4540EAP | MAXIMIC | Low-voltage, dual 4-to-1 calibration multiolexer. |
| MAX164CCNG | MAXIMIC | CMOS 12-bit A/D converter with track-and-hold. Error +-1 LSB. |
| MAX6320PUK38DZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.800V, reset timeout(min) 1.12sec, watchdog timeout(typ) 25.6sec |
| ADC0820BCM | MAXIMIC | CMOS high speed 8-bit A/D converter with track/hold function. INL(LSB) +-1/2. |
| MAX6309UK37D4-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 3.608(min),3.793(max) Nominal timeout period 1120ms. |
| MAX6316MUK49DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.900V, min reset timeout 1120ms, typ watchdog timeout 6.3ms |
| MAX4193EPA | MAXIMIC | CMOS micropower step-up switching regulator |
| MAX237MRG | MAXIMIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX293EPA | MAXIMIC | 8th-order, lowpass, elliptic, switched-capacitor filter. Clock-tunable corner-freguency range 0.1Hz to 25kHz |
| DG442CY | MAXIMIC | Improved, quad, SPST analog switch |
| MAX6316LUK34AX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.400V, min reset timeout 1ms, typ watchdog timeout 102ms |
| MX7581KCWI | MAXIMIC | CMOS 8-bit 8-channel data acquisition system. Error 3/4 LSB. |
| MAX505ACWG | MAXIMIC | Quad 8-bit DAC with Rail-to-Rail voltage outputs. Double-buffered logic inputs. TUE +-1 LSB. |
| MAX520BMJE | MAXIMIC | Quad, 2-wire serial 8-bit DAC with Rail-to-Rail, unbuffered outputs. TUE(LSB) 2. |
| MAX6309UK49D1-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 4.778(min),5.023(max) Nominal timeout period 1ms. |
| MAX6318LHUK26AY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 2.630V min, reset timeout 1ms, typ watchdog timeout 1.6sec |
| MAX4663EAE | MAXIMIC | 2.5om, quad, SWPST, CMOS analog switch (two NC and two NO switches). |
| MAX203CWP | MAXIMIC | +5V RS-232 transceiver with 0.1 microF external capacitors |
| ICL7611BCPA | MAXIMIC | Single operational amplifier,5mV |
