| パートいいえ | メーカー | アプリケーション |
|---|
| MXD1013SA050 | MAXIMIC | 3-in-1 silicon delay line. Output delay 50ns. |
| MAX6361HUT46-T | MAXIMIC | Low-power microprocessor supervisory circuit with manual reset input. Reset threshold(typ) 4.63V. Active-high push-pull reset. |
| MAX640C/D | MAXIMIC | 3.3V or adjustable, high-efficiency, current-limiting PFM control scheme, step-down DC-DC converter. |
| MAX6318MHUK45AW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.500V, reset timeout(min) 1ms, watchdog timeout(typ) 6.3ms |
| MAX333ACPP | MAXIMIC | Precision, quad, SPDT, CMOS analog switch. |
| MAX305CPE | MAXIMIC | Precision, dual, high-speed analog switch. |
| MAX501BCWG | MAXIMIC | Voltage-output, 12-bit multiplying DAC. Error(LSBs) +-3/4. |
| MAX4571EAI | MAXIMIC | Serially controlled, clickless audio/video switch. 2-wire, fast-mode, IIC-compatible. |
| MAX6313UK40D3-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 3.900(min) 4.100(max).Nominal timeout period 140ms. |
| MAX5251AEAP | MAXIMIC | +3V, quad, 10-bit, voltage-output DAC with serial interface. INL(LSB) +-1/2. |
| MAX6320PUK34CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.400V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec |
| MAX6317HUK28AY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 2.800V, min reset timeout 1ms, typ watchdog timeout 1.6sec |
| MAX326CSE | MAXIMIC | Quad, SPTS, ultra-low leakage, CMOS analog switch. |
| MAX4135EWG | MAXIMIC | 1-input/6-output video distribution amplifier. Fixed gain of 2V/V, 185MHz -3dB bandwidth. |
| MAX240CMH | MAXIMIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX6316MUK49AZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.900V, min reset timeout 1ms, typ watchdog timeout 25.6sec |
| MAX519AESE | MAXIMIC | 2-wire serial 8-bit dual DAC with Rail-to-Rail outputs. TUE(LSB) 1. |
| MAX853ESA | MAXIMIC | Low-noise, regulated, negative charge-pump power supplies for GaAsFET bias. 1mVp-p output voltage ripple. 100kHz charge-pump switching frequency. Logic-level shutdown mode 1microA max over temp. |
| MAX6310UK31D3-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 3.003(min),3.157(max). Nominal timeout period 140ms. |
| MAX777LESA | MAXIMIC | Low-voltage input, step-up DC-DC converter |
| MAX628CPA | MAXIMIC | Dual power MOSFET driver contains one inverting and one non-inverting section. |
| MAX1241ACPA | MAXIMIC | +2.7V, low-power, 12-bit serial ADCs in 8-pin SO. INL (LSB) +1/2 |
| MAX505AENG | MAXIMIC | Quad 8-bit DAC with Rail-to-Rail voltage outputs. Double-buffered logic inputs. TUE +-1 LSB. |
| MAX349CPN | MAXIMIC | Serially controlled, low-voltage, 8-channel multiplexer |
| MAX6316LUK38AW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.800V, min reset timeout 1ms, typ watchdog timeout 6.3ms |
| MAX274BC/D | MAXIMIC | 8th-order continuous-time active filter |
| DG528DK | MAXIMIC | 8-channel latchable multiplexer |
| MAX4690CAE | MAXIMIC | 1.25om, quad, SPST, CMOS analog switch (two NO switches). |
| MAX6321HPUK33AW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.300V, reset timeout(min) 1ms, watchdog timeout(typ) 6.3ms |
| MAX4375TESD | MAXIMIC | Low-cost, micropower, high-side current-sense amplifier + comparator + reference IC. Gain +20V/V. |
