| パートいいえ | メーカー | アプリケーション |
|---|
| MAX639C/D | MAXIMIC | 5V or adjustable, high-efficiency, current-limiting PFM control scheme, step-down DC-DC converter. |
| MAX4420MJA | MAXIMIC | High-speed, 6A single MOSFET driver. 4.5V t0 18V supply range. |
| MAX4522C/D | MAXIMIC | Quad, low-voltage, SPST analog switch. |
| MAX6316LUK38CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.800V, min reset timeout 140ms, typ watchdog timeout 1.6sec |
| MAX3182EEUK-T | MAXIMIC | +-15kV ESD-protected, 0.5microA,+3V to +5.5V, 1.5Mbps RS-232 receiver. |
| MAX7231CFIPL | MAXIMIC | Triplexed LCD decoder/driver (8 digits/7 segments; parallel input format; 2 annunciators per digit) |
| MAX4450EUK-T | MAXIMIC | Ultra-small, low-cost, 210MHz, single-supply op amp Rail-to-Rail outputs. |
| MAX6319LHUK47A-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-low,push/pull and active-high, push/pull).Factory-trimmed reset threshold(typ) 4.700V, reset timeout(min) 1ms |
| MAX4274BBESA | MAXIMIC | Dual, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 12.5, 1+ (Rf/Dg) noninverting gain 13.5, -3dB BW 460kHz. |
| MAX6309UK46D4-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 4.514(min),4.746(max) Nominal timeout period 1120ms. |
| MAX463CNG | MAXIMIC | Two-channel, triple RGB switch and buffer. Voltage gain 1V/V. |
| MX581JCSA | MAXIMIC | High precision 10 volt reference. Error +-30mV. |
| MAX6310UK47D3-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 4.583(min),4.818(max). Nominal timeout period 140ms. |
| MAX6318LHUK29CX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 2.930V min, reset timeout 140ms, typ watchdog timeout 102ms |
| MAX1092AEEG | MAXIMIC | 400ksps, +5V, 4-channel single-ended/2-channel pseudo-differential, 10-bit ADCs with +2.5V reference and parallel interface. INL (LSB) 0.5 |
| MAX6301CSA | MAXIMIC | +5V, low-power microprocessor supervisory circuit with adjustable reset/watchdog (active-low reset, open-drain reset output). |
| MAX6336US24D2-T | MAXIMIC | Ultra-low-voltage, low-power microprocessor circuit with manual reset (reset output active-low, push/pull . Reset threshold(typ) 2.4V, reset timeout(min) 20ms. |
| MAX6320PUK43BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.300V, reset timeout(min) 20ms, watchdog timeout(typ) 6.3ms |
| HI1-0201-5 | MAXIMIC | Quad SPST CMOS analog switch |
| DG409CJ | MAXIMIC | Improved, dual 4-channel, CMOS analog multiplexer |
| DG411CJ | MAXIMIC | Improved, quad, SPST analog switches |
| MAX748AEPA | MAXIMIC | Step-down, current-mode PWM DC-DC controller. Input voltage range 3.3V to 16V |
| MAX516AMRG | MAXIMIC | Quad comparator with programmable threshold. Error (LSB) +-1 |
| MAX6314US43D1-T | MAXIMIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 4.30V. Reset timeout period(min) 1ms. |
| MAX909CPA | MAXIMIC | Quad, high-speed, ultra low-power, single +-5V supply operation TTL comparator. Internal latch. |
| MAX6317HUK25BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 2.500V, min reset timeout 20ms, typ watchdog timeout 1.6sec |
| MAX509BCPP | MAXIMIC | Quad, serial 8-bit DAS with Rail-to-Rail output. TUE (LSB) +-1 1/2 |
| DG384AK | MAXIMIC | General purpose CMOS quad analog switch. |
| MAX144AMJA | MAXIMIC | +2.7 V, low-power, 2-channel, 108 ksps, serial 12-bit ADC. INL(LSB) +-0.5 |
| MAX6313UK44D3-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 4.270(min) 4.490(max).Nominal timeout period 140ms. |
