| パートいいえ | メーカー | アプリケーション |
|---|
| MXD1013C/D035 | MAXIMIC | 3-in-1 silicon delay line. Output delay 35ns. |
| MAX6316LUK27DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 2.700V, min reset timeout 1120ms, typ watchdog timeout 6.3ms |
| IH5042CJE | MAXIMIC | General-purpose CMOS analog switch. Single pole, double throw (SPDT) |
| MAX3222EEWN | MAXIMIC | +-15kV ESD-protected, down to 10nA, 3.0V to5.5V, up to 1Mbps, true RS-232 transceiver. |
| MAX6307UK46D1-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds4.514(min),4.746(max).Nominal timeout period 1ms. |
| MAX422CPA | MAXIMIC | +-15V chopper stabilized operational amplifier. |
| MAX178BENG | MAXIMIC | Calibrated 12-bit ADC with T/H and reference. |
| MX584TQ | MAXIMIC | Pin programmable precision voltage reference. Error +-10mV. |
| MAX4204EUA | MAXIMIC | Ultra-high-speed 780MHz -3dB bandwidth, 280MHz 0.1dB gain flatness, low-noise, low-power, open-loop buffer. |
| MAX6318MHUK41CW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.100V, reset timeout(min) 140ms, watchdog timeout(typ) 6.3ms |
| MAX3185CAP | MAXIMIC | +-15kV ESD-protected, EMC-compliant, 230kbps RS-232 serial port for motherboards/desktop PSs. |
| MAX4132EUA | MAXIMIC | Dual, wide-bandwidth, low-power, +2.7V to +6.5V single-supply operation, Rail-to-Rail I/O op amp. |
| MAX327C/D | MAXIMIC | Quad, SPTS, ultra-low leakage, CMOS analog switch. |
| MX7845BQ | MAXIMIC | Complete, 12-bit multiplying DAC. 4-quadrant multiplication. |
| MAX241ECWI | MAXIMIC | +-15kV ESD-protected, +5V RS-232 transceiver |
| MAX651MJA | MAXIMIC | 3.3V or adjustable, high-efficiency, current-limited control scheme, step-down DC-DC controller. |
| MX7536KCWI | MAXIMIC | Microprocessor-compatible, 14-bit D/A converter. Accuracy +-1 LSB. |
| ICM7218CIQI | MAXIMIC | 8 digit LED display driver |
| MAX4274CAESA | MAXIMIC | Dual, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 100, 1+ (Rf/Dg) noninverting gain 101, -3dB BW 230kHz. |
| MAX4502ESA | MAXIMIC | Low-voltage, SPST, CMOS analog switch. |
| MAX6322HPUK46C-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.630V, reset timeout(min) 140ms |
| MAX1270AENG | MAXIMIC | Multirange, +5V, 8-channel, serial 12-bit ADC. INL(LSB) +1/2,-1/2 |
| MAX532BMJE | MAXIMIC | Dual, serial-input, voltage-output, 12-bit MDAC. Error (LSB) +-1 |
| MAX367CWN | MAXIMIC | Signal-line circuit protector. |
| MAX542AESD | MAXIMIC | +5V,serial-input, voltage-output, 16-bit DAC. INL (LSB) +-1 |
| MXD1210ESA | MAXIMIC | Nonvolatile RAM controller |
| MAX6318LHUK49CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input, reset output active-low, push/pull; active-high,push/pull).Factory-trimmed reset threshold (typ) 4.900V, min reset timeout 140ms, typ watchdog timeout 1.6sec |
| MAX736EPD | MAXIMIC | -12V, inverting carrent-mode PWM regulator. |
| MAX626CPA | MAXIMIC | Dual inverting power MOSFET driver. |
| MAX986ESA | MAXIMIC | Single, low-power, Rail-to-Rail I/O comparator. Open-drain output voltage extends beyond Vcc. |
